The PZS 140RA is a full-featured matrix mixer with integral 35 Watt power amplifiers. Its five-input, four-output architecture is supported by a full mix matrix, front panel zone assign switches, input level and EQ controls and a new remote control interface. By using the new Digitool™ 4S four-button, flush-mount control panel, the PZS 140RA’s matrix cross points can be configured for either "input to zone" (source select) or "zone from input" (zone select) operation. Multiple controls can be connected via the PZS 140RA’s CAT5 serial data bus, which makes installation simple and cost-effective. LED indicators on each input section mirror changes made by the remote controls, so remote operation status is easily monitored on the front panel.

For easy installation, each input channel includes microphone and line-level inputs terminated on removable Euro connectors. Input channels 1 and 2 also include low-Z XLR connectors for easily terminating microphones used in paging applications. These inputs feature recessed front panel controls for level, threshold and paging hold time. Channels 3, 4 and 5 also include dual rear panel RCA connectors for easy termination of stereo sources.

The PZS 140RA's four outputs include front panel master level controls, signal presence and clipping LED indicators. The rear panel features removable Euro connectors for terminating preamp and power amp I/O connections. The line-level outputs are 600 Ohm balanced, and the power amplifier section for each output includes transformer-coupled 70 Volt, 25 Volt and 8 Ohm outputs.

In addition, a direct-coupled 4 Ohm output is provided. All power amplifier outputs are 35 Watts.

Features

• Five input channels, assignable to any output
• Microphone and line-level inputs on each channel
• Two XLR low-Z inputs (balanced)
• Dual RCA connectors for terminating stereo sources (Channels 3, 4 and 5)
• Four balanced (600 Ohm) line-level outputs
• Four 35 Watt power amplifiers, each with 70 Volt, 25 Volt, 8 Ohm and 4 Ohm outputs
• Removable Euro connectors for all I/O terminations
• Serial data interface link supports Digitool 4S for remote control applications
• Signal LED indicator on each channel
• Zone assignment switches for each channel
• Adjustable front panel threshold and paging hold on channels 1 and 2
• Four master output level controls with signal and clipping LED indicators
• 48 Volt phantom power on all low-Z inputs, with master defeat
• 3U rack-mount package