Peavey XR Series Powered Mixers Now Available Through Architectural Acoustics
March 13, 2003, MERIDIAN, Miss. - Architectural Acoustics, a division of Peavey Electronics Corporation, proudly announces the addition of Peavey's renowned XR Series powered mixeramplifiers to its product line. The portable size and weight of these XR Series mixersalong with exclusive, patented, built-in technologiesmake them ideal for many applications, including clubs, schools, rehearsal rooms, churches and as supplementary systems for larger, fixed installations.
The XR 684F and 696F both feature two nine-band EQs with built-in Feedback Ferret® digital feedback elimination systems, which use a comprehensive 16 filters to automatically scan and filter feedback. This feature is invaluable to sound reinforcement and unique to the powered mixer market. Also included in these models is Peavey's Recall 48-bit digital effects processor, with four user-preset locations for storage and two adjustable parameters for fine-tuning the settings. Effects include reverb and delay simultaneously or reverb, delay and chorus separately.
The XR 600G, 800, 800F+ and 1600F also feature two nine-band graphic EQs and Peaveys Feedback Locating System (FLS®). FLS detects the onset of feedback in the frequency spectrum, then lights an LED over the offensive frequency's corresponding EQ slider so the user can quickly adjust it to remove feedback.
All XR Series powered mixers include Peaveys Distortion Detection Technique (DDT™), which virtually eliminates power amp distortion, producing a much clearer sound than ordinary powered mixers. DDT also protects speakers from damage caused by distorted signals.
XR 560 - 150 RMS Watts at 4 Ohms
- Five channels
- Seven-band output EQ with FLS
- DDT
- Digital reverb
- 15 Volts phantom power
- Tape in/out RCA connectors
- Monitor and effects send on each channel
- Two-band EQ
- XLR and 1/4" inputs
- 48 Volts phantom power
XR 600G - 400 RMS Watts at 4 Ohms
- DDT speaker protection
- FLS
- Three-band EQ on each channel
- Seven channels
- Signal present/clip indicator on each channel
- XLR and 1/4" inputs on channels 1-6
- Mono nine-band graphic EQ patchable to monitor or channel 3
- Built-in digital effects
XR 684F Features: - 400 Watts RMS program into 4 Ohms
- Eight channels outfitted for 1/4" and XLR jacks
- Insert points on channels 1 and 2
- Nine-band stereo main graphic EQ
- Mono nine-band graphic EQ assignable to monitor or channel 3
- Built-in Feedback Ferret
- DDT
- 48 Volts phantom power
- Recall 48-bit digital effects processor with four user presets
XR 696F Features: - 1200 Watts RMS program into 4 Ohms
- Eight channels outfitted for 1/4" and XLR jacks
- Insert points on channels 1 and 2
- Nine-band stereo main graphic EQ
- Nine-band assignable mono graphic EQ for monitor or channel 3
- Built-in Feedback Ferret
- DDT
- 48 Volts phantom power
- Recall 48-bit digital effects processor with four user presets
XR 800F - Eight low-noise, low-Z preamps on channels 1-8
- Six high-Z mic/line inputs on channels 1-6
- Channel clipping LEDs
- Three-band EQ and EFX send on channels 1-8
- Monitor send on channels 1-9
- Three stereo line inputs on channels 7-9
- 16-bit audio/32-bit internal precision, DSP stereo reverb/effects with two parameter controls
- Two nine-band graphic EQs with FLS
- Selectable 48 Volts phantom power
- 2 x 210 Watts @ 4 ohms internal power amplifier; 420 Watts @ 8 ohms in bridge mode
- DDT
XR 800F+ Features: - 500 Watts RMS per channel into 4 Ohms
- Eight low noise, low-Z preamps
- Three-band EQ and EFX send on channels 1-8
- Three stereo line inputs on channels 7-9
- 16-bit audio/32-bit internal DSP stereo reverb and effects
- DDT
- FLS
- Selectable 48 Volts phantom power
XR 1600F - Three power amplifiers (200 Watts @ 4 Ohms)
- Built-in crossover (150 Hz)
- Digital effects with time/size and color/tone controls
- 20 channels
- Two nine-band EQs with FLS
- 14 XLR balanced mic inputs
- Removable metal cover
- Selectable 48 Volts phantom power
|
